UK TOOLS, DIY & HOMECheck the model. Check the fit.
TOOL → CONNECTOR → HOSE

Dust port & vacuum adapter matcher

Find an adapter by its documented tool and hose connection. Check the exact model or fitting system: two parts labelled 35 mm do not necessarily fit together.

Check a documented connection

Selections can be shared using this page’s URL. No measurements are entered, stored or sent.

Matching evidence

Loading the matcher. All manufacturer references are also available below.

READ THE RIGHT DIMENSION

Inside, outside or nominal?

ID is the clear inside diameter of an opening. OD is the outside diameter across the part. A hose’s nominal size is its product designation; it is not a measured cuff diameter.

For a sleeve-over-port joint, note the port OD and sleeve ID at the actual joining surfaces. A tapered, threaded or locking connection also needs its specified geometry and engagement. Measuring two similar numbers alone does not verify an adapter.

This directory records manufacturer figures only when their labels are explicit. “Not documented” means the cited source does not provide that field; it does not mean zero.

Cross-section diagram separating the outer diameter across a tube from the inner diameter across its opening. Hose nominal size is a separate designation, not a measured cuff dimension.
Illustration of the terms; not to scale and not a compatible pair.

Connection comparison

DeWalt’s listed AirLock combination connects directly using its original connector. Bosch’s listed combination uses a reducer; Festool’s listed fitting systems use the named connecting sleeve. No bare-hose direct Festool connection is established here. Unknown means the complete connection has not been documented, not that it cannot fit.

Scroll the table horizontally on smaller screens. Select a part code to read its full evidence. Nominal hose size and adapter diameter are deliberately excluded from the port and cuff fields.

Published endpoint dimensions and documented connection modes
Part / evidenceFull tool model or fittingFull extractor model or hosePort IDPort ODCuff IDCuff ODConnection mode
1600499005Bosch GEX 125 A
Bosch GEX 150 AC
Bosch GBS 75 AE
Bosch GAS 35 L AFC
Bosch GAS 35 L SFC+
Bosch GAS 35 M AFC
Bosch GAS 55 M AFC
Not documentedNot documentedNot documentedNot documentedVia documented reducer / connecting sleeve
DWV9000DeWalt DWE6423-GBDeWalt DWV902L Type 2
DeWalt DWV902M Type 2
DeWalt DWV902MT Type 2
Not documentedNot documentedNot documentedNot documentedDirect — original AirLock connection
577162Festool tool with D27 or D36 flange (system fitting)Festool D27 suction hose (system fitting)
Festool D27/32 suction hose (system fitting)
Not documentedNot documentedNot documentedNot documentedVia documented reducer / connecting sleeve
500668Not documentedFestool smooth hose with integrated plug-it cable (GQ)Not documentedNot documentedNot documentedNot documentedUnknown complete connection — one end confirmed
195548-6Not documentedMakita VC2000L
Makita VC2012L
Makita VC2512L
Makita VC3011L
Not documentedNot documentedNot documentedNot documentedUnknown complete connection — one end confirmed
027-0118Evolution R185CCSX
Evolution R185CCSX+
Not documentedNot documentedNot documentedNot documentedNot documentedUnknown complete connection — one end confirmed
2.863-112.0Not documentedKärcher WD 2 Plus V-12/4/18/C
Kärcher WD 3 V-17/4/20
Kärcher WD 4 V-20/5/22
Kärcher WD 5 V-25/5/22
Kärcher WD 6 P S V-30/8/22/T
Not documentedNot documentedNot documentedNot documentedUnknown complete connection — one end confirmed
DWV9130Not documentedDeWalt DWV902M Type 2Not documentedNot documentedNot documentedNot documentedUnknown complete connection — one end confirmed
914411Not documentedNumatic Henry HVR 160
Numatic Hetty HET 160
Not documentedNot documentedNot documentedNot documentedUnknown complete connection — one end confirmed
STATIC REFERENCE · CHECKED 2026-11-20

Documented connections

These 3 records identify both connection endpoints. Each record may cover several explicitly listed models or a named manufacturer fitting system.

DOCUMENTED CONNECTION

Bosch GEX / GBS tools to listed GAS extractors

1600499005 · Bosch reduction connector

Connection mode: Via documented reducer / connecting sleeve

Bosch lists these exact tools and extractors against connector 1600499005. Use the complete model designation and the original compatible hose arrangement.

Tool side

Bosch GEX 125 A
Bosch GEX 150 AC
Bosch GBS 75 AE

Extractor / hose side

Bosch GAS 35 L AFC
Bosch GAS 35 L SFC+
Bosch GAS 35 M AFC
Bosch GAS 55 M AFC

Manufacturer’s dimension description: Diameter min 25 mm; diameter max 35 mm (manufacturer labels, not ID/OD).

Show separate ID, OD and nominal fields
Dimensions for 1600499005
Tool port inside diameterNot documented
Tool port outside diameterNot documented
Hose / kit nominal widthNot documented
Hose cuff inside diameterNot documented
Hose cuff outside diameterNot documented
Adapter inside diameterNot documented
Adapter outside diameterNot documented
  • GEX 125 A is not GEX 125-1 AE. Similar model names are not included automatically.
  • The published 25/35 mm values do not establish a measured port, cuff or cross-brand fit.

Manufacturer evidence

  • Bosch UK: connector 1 600 499 005 — Exact adapter, listed tool and extractor models, and published 25/35 mm diameter labels; no ID/OD designation. Checked 2026-11-20.
DOCUMENTED CONNECTION

DeWalt DWE6423-GB to DWV902 Type 2 AirLock

DWV9000 · DeWalt AirLock twist-lock connection

Connection mode: Direct — original AirLock connection

The sander supports direct AirLock connection. The DWV902 Type 2 manual describes its fitted AirLock hose connector and lists DWV9000 in the same system.

Extractor / hose side

DeWalt DWV902L Type 2
DeWalt DWV902M Type 2
DeWalt DWV902MT Type 2

Manufacturer’s dimension description: No tool-port ID/OD or cuff ID/OD documented in these references.

Show separate ID, OD and nominal fields
Dimensions for DWV9000
Tool port inside diameterNot documented
Tool port outside diameterNot documented
Hose / kit nominal widthNot documented
Hose cuff inside diameterNot documented
Hose cuff outside diameterNot documented
Adapter inside diameterNot documented
Adapter outside diameterNot documented
  • An existing original AirLock connector may already provide the connection; this is not a requirement to buy another adapter.
  • This system relationship does not verify a third-party hose or a different extractor revision.

Manufacturer evidence

  • DeWalt UK: DWE6423-GB — The DWE6423-GB product page expressly supports direct AIRLOCK connection. Checked 2026-11-20.
  • DeWalt UK: DWV902L/M/MT Type 2 manual — English connection instructions and accessory list: fitted AirLock connector; DWV9000 twist-lock connection; DWV9130 is labelled 35 mm OD. Checked 2026-11-20.
DOCUMENTED CONNECTION

Festool D27/D36 flange to D27 or D27/32 hose

577162 · Festool D27 DM-AS/CT sleeve

Connection mode: Via documented reducer / connecting sleeve

Festool identifies these hose systems and tool-flange systems for connecting sleeve 577162. Match the fitting system as well as the sleeve code.

Tool side

Festool tool with D27 or D36 flange (system fitting)

Extractor / hose side

Festool D27 suction hose (system fitting)
Festool D27/32 suction hose (system fitting)

Manufacturer’s dimension description: Published sleeve diameter 27 mm; hose names D27 and D27/32. ID/OD not specified.

Show separate ID, OD and nominal fields
Dimensions for 577162
Tool port inside diameterNot documented
Tool port outside diameterNot documented
Hose / kit nominal widthNot documented
Hose cuff inside diameterNot documented
Hose cuff outside diameterNot documented
Adapter inside diameterNot documented
Adapter outside diameterNot documented
  • This is a documented fitting-system relationship, not a claim about every Festool extractor model.
  • A third-party 27 mm or 36 mm port is not automatically a Festool D27/D36 flange.

Manufacturer evidence

Hoses and adapters with one end confirmed

The manufacturer documents the tool side or extractor side for these parts. The connection at the other end still needs verification.

ONE END DOCUMENTED

Festool GQ hose sleeve: separate variant

500668 · Festool D27/22 DM-AS/CT sleeve

Connection mode: Unknown complete connection — one end confirmed

This sleeve is restricted to the smooth hose version with integrated plug-it cable, identified as GQ. Festool also names D27/D36 tool flanges.

Tool side

No exact tool confirmed

Extractor / hose side

Festool smooth hose with integrated plug-it cable (GQ)

Manufacturer’s dimension description: Published sleeve diameter 27/22 mm; ID/OD not specified.

Show separate ID, OD and nominal fields
Dimensions for 500668
Tool port inside diameterNot documented
Tool port outside diameterNot documented
Hose / kit nominal widthNot documented
Hose cuff inside diameterNot documented
Hose cuff outside diameterNot documented
Adapter inside diameterNot documented
Adapter outside diameterNot documented
  • Do not substitute it for the standard 577162 sleeve merely because both names contain D27.
  • An exact tool/extractor pair is not represented by this reference.

Manufacturer evidence

ONE END DOCUMENTED

Makita VC adapter reference

195548-6 · Makita joint adaptor

Connection mode: Unknown complete connection — one end confirmed

Makita UK lists this adapter among optional accessories for these VC extractors. That confirms the extractor-side reference, not a particular power-tool connection.

Tool side

No exact tool confirmed

Extractor / hose side

Makita VC2000L
Makita VC2012L
Makita VC2512L
Makita VC3011L

Manufacturer’s dimension description: Ø38 × 25/22 mm (published designation; ID/OD not specified).

Show separate ID, OD and nominal fields
Dimensions for 195548-6
Tool port inside diameterNot documented
Tool port outside diameterNot documented
Hose / kit nominal widthNot documented
Hose cuff inside diameterNot documented
Hose cuff outside diameterNot documented
Adapter inside diameterNot documented
Adapter outside diameterNot documented
  • No Makita DHS680, DBO180 or cross-brand tool connection is inferred from these numbers.
  • Consult Makita’s machine/extractor compatibility selector for the complete original parts chain.

Manufacturer evidence

ONE END DOCUMENTED

Evolution R185CCSX / R185CCSX+ tool adapter

027-0118 · Evolution dust port adaptor

Connection mode: Unknown complete connection — one end confirmed

Evolution names R185CCSX and R185CCSX+ for dust-port adapter 027-0118. This identifies the saw-side component.

Tool side

Evolution R185CCSX
Evolution R185CCSX+

Extractor / hose side

No exact extractor or hose confirmed

Manufacturer’s dimension description: No ID/OD dimensions documented on the cited adapter page.

Show separate ID, OD and nominal fields
Dimensions for 027-0118
Tool port inside diameterNot documented
Tool port outside diameterNot documented
Hose / kit nominal widthNot documented
Hose cuff inside diameterNot documented
Hose cuff outside diameterNot documented
Adapter inside diameterNot documented
Adapter outside diameterNot documented
  • The source does not establish a Henry, Titan, Kärcher or other vacuum-cuff connection.
  • Do not apply cordless R185CCSX-Li specifications to these corded models.

Manufacturer evidence

ONE END DOCUMENTED

Kärcher WD power-tool kit reference

2.863-112.0 · Kärcher vacuum kit for power tools

Connection mode: Unknown complete connection — one end confirmed

Kärcher lists these WD variants for kit 2.863-112.0, comprising an extension hose and tool adapter. No named power-tool model is verified by that list.

Tool side

No exact tool confirmed

Extractor / hose side

Kärcher WD 2 Plus V-12/4/18/C
Kärcher WD 3 V-17/4/20
Kärcher WD 4 V-20/5/22
Kärcher WD 5 V-25/5/22
Kärcher WD 6 P S V-30/8/22/T

Manufacturer’s dimension description: Standard nominal width 35 mm; this is not a cuff ID or OD.

Show separate ID, OD and nominal fields
Dimensions for 2.863-112.0
Tool port inside diameterNot documented
Tool port outside diameterNot documented
Hose / kit nominal width35 mm
Hose cuff inside diameterNot documented
Hose cuff outside diameterNot documented
Adapter inside diameterNot documented
Adapter outside diameterNot documented
  • The kit’s nominal width cannot prove fit to a 35 mm tool port.
  • Other WD revisions and replaced hoses need their own checks.

Manufacturer evidence

ONE END DOCUMENTED

DeWalt AirLock adapter with explicit OD

DWV9130 · DeWalt 35 mm OD adapter

Connection mode: Unknown complete connection — one end confirmed

The DWV902 Type 2 manual lists DWV9130 in its AirLock accessory range and explicitly labels the adapter’s outside diameter.

Tool side

No exact tool confirmed

Extractor / hose side

DeWalt DWV902M Type 2

Manufacturer’s dimension description: 35 mm OD adapter (explicit manufacturer label).

Show separate ID, OD and nominal fields
Dimensions for DWV9130
Tool port inside diameterNot documented
Tool port outside diameterNot documented
Hose / kit nominal widthNot documented
Hose cuff inside diameterNot documented
Hose cuff outside diameterNot documented
Adapter inside diameterNot documented
Adapter outside diameter35 mm
  • This value describes the adapter, not the tool port, hose bore or cuff.
  • No unnamed 35 mm tool socket is declared compatible; locking geometry and engagement remain unverified.

Manufacturer evidence

  • DeWalt UK: DWV902L/M/MT Type 2 manual — English connection instructions and accessory list: fitted AirLock connector; DWV9000 twist-lock connection; DWV9130 is labelled 35 mm OD. Checked 2026-11-20.
ONE END DOCUMENTED

Numatic Henry and Hetty 160 original hose

914411 · Numatic FloMax conical hose

Connection mode: Unknown complete connection — one end confirmed

Numatic’s exploded drawing names hose 914411 for the Henry and Hetty 160. Check the machine and original hose part code for the specific kit.

Tool side

No exact tool confirmed

Extractor / hose side

Numatic Henry HVR 160
Numatic Hetty HET 160

Manufacturer’s dimension description: 38 mm–32 mm conical hose designation. The drawing does not identify cuff ID or OD.

Show separate ID, OD and nominal fields
Dimensions for 914411
Tool port inside diameterNot documented
Tool port outside diameterNot documented
Hose / kit nominal widthNot documented
Hose cuff inside diameterNot documented
Hose cuff outside diameterNot documented
Adapter inside diameterNot documented
Adapter outside diameterNot documented
  • Check the original hose code for your machine revision. Power-tool adapter fit still needs evidence.

Manufacturer evidence

Coverage still being verified

These combinations are excluded from finder results. Missing evidence is not evidence that a connection is impossible.

Before ordering a connector

  1. Read the complete tool model, extractor model and hose or cuff code. A replacement hose may have a different end.
  2. Check the manufacturer’s adapter code and the supplied contents. An original connector may already be fitted.
  3. Use the tool and extractor instructions to confirm suitability for the material and task. A physical connection does not establish dust class, filtration, antistatic performance or extraction capacity.

Browse exact tool references → · Find other accessory sizes →