UK TOOLS, DIY & HOMECheck the model. Check the fit.
Milwaukee · Circular saws

Milwaukee M18 FCS66-121CSaw blades & size guide

The UK M18 FCS66-121C specification documents a 190 mm blade with 30 mm bore and 5,800 rpm no-load speed. The source is Milwaukee's original model specification, not a claim about present kit availability.

Saw blade face showing diameter and bore, plus an enlarged cross-section distinguishing the body, tooth cutting width and a riving knife where fitted.

Circular saw blade: diameter, bore and cutting width

The face example uses Makita DHS680Z’s documented 165 mm diameter and 20 mm bore. The separate riving-knife inset illustrates the HSE saw-bench relationship: blade body thinner than knife, knife thinner than kerf. It does not state that DHS680Z has a riving knife. Follow the exact saw manual for all limits.

Schematic, not to scale; not a compatibility guarantee. Open the image to enlarge.

Sources: Makita UK DHS680Z specification · HSE: saw-bench riving knife and kerf. Diagram evidence reviewed 2026-11-20.

MANUFACTURER SPECIFICATIONS

What size does it take?

Blade diameter
190 mm
Blade bore
30 mm
No-load speed
5,800 rpm
Maximum cut at 90°
66 mm
Maximum cut at 45°
48 mm

This reference is for M18 FCS66-121C. The 190 mm diameter and 30 mm bore are initial checks, not a promise that every blade with those dimensions is suitable.

Manufacturer source ↗Checked 2026-11-20Exact model: M18 FCS66-121C
Ad · affiliate linkSearch Amazon UKCompare the selected product with your model’s specifications.

Same diameter and bore: comparison references

These blade records share your model’s published diameter and bore, but their manufacturer mappings do not list this model. Compare kerf, body thickness, construction, rated speed and material in the manual before considering any substitution.

Check before buying

  1. Confirm M18 FCS66 and the -121C kit identity; do not transfer these figures to a different M18 generation or suffix.
  2. Check kerf, blade body thickness and permitted blade construction in the exact saw manual.
  3. The blade's speed rating must meet or exceed the specified 5,800 rpm maximum.
  4. Match the blade's intended material, tooth geometry and cutting direction to the saw and task.

Print the saw blade diameter, bore and kerf chart →

Check documented dust extraction connections →

Source & scope

Milwaukee 2023 UK catalogue · M18 FCS66-121C technical data

Manufacturer source checked 2026-11-20.

Report a specification correction
Looking for a different model?Browse all model references →

More circular saws

Browse category