A starting point for 2 exact models.
Bore values are kept exactly as published. Check the mounting system, accessory type, speed rating and specified guard.
The models below share the stated size or part reference. Other requirements can differ between tools.
Which models list this size?
Open your model for all specifications and any documented replacement part numbers.
| Exact model | Published size or fitting | Manufacturer evidence |
|---|---|---|
| Makita DGA452Sizes & buying checks → | Disc diameter115 mmDisc bore22.23 mmSpindle threadM14 | Source ↗Checked 2026-10-03 |
| Makita GA4530RSizes & buying checks → | Disc diameter115 mmDisc bore22.23 mmSpindle threadM14 | Source ↗Checked 2026-10-03 |
What else needs to match?
Makita DGA452: buying checks
Start with the listed 115 mm diameter and 22.23 mm bore. Verify the accessory speed, application and guard requirements.
- The disc speed rating must meet or exceed the maximum marked speed of the tool.
- Check approved disc types and thickness in the manual.
- Do not select a larger disc because it shares the bore size; confirm the correct guard for the operation.
Makita GA4530R: buying checks
Diameter and bore are initial checks. Disc type, thickness, guard, flange and speed rating must also suit the tool and task.
- Match the disc’s rated speed to at least the grinder’s specified maximum speed.
- Check the permitted wheel type and thickness, mounting flange and required guard in the manual.
- Select the abrasive for the material and operation; a cutting disc must not be used for side grinding.