UK TOOLS, DIY & HOMECheck the model. Check the fit.
Einhell · Circular saws

Einhell TE-CS 18/165-1 Li - SoloSaw blades & size guide

Einhell's UK specification for article 4331207 lists a 165 mm blade, 20 mm blade holder diameter and 4,200 rpm maximum idle speed. The tool is an 18 V Power X-Change model.

Saw blade face showing diameter and bore, plus an enlarged cross-section distinguishing the body, tooth cutting width and a riving knife where fitted.

Circular saw blade: diameter, bore and cutting width

The face example uses Makita DHS680Z’s documented 165 mm diameter and 20 mm bore. The separate riving-knife inset illustrates the HSE saw-bench relationship: blade body thinner than knife, knife thinner than kerf. It does not state that DHS680Z has a riving knife. Follow the exact saw manual for all limits.

Schematic, not to scale; not a compatibility guarantee. Open the image to enlarge.

Sources: Makita UK DHS680Z specification · HSE: saw-bench riving knife and kerf. Diagram evidence reviewed 2026-11-20.

MANUFACTURER SPECIFICATIONS

What size does it take?

Blade diameter
165 mm
Blade bore
20 mm
No-load speed
4,200 rpm
Battery voltage
18 V
Uk article number
4331207
Maximum cut at 90°
54 mm

Match 165 mm diameter and 20 mm bore, then check the exact blade's suitability for TE-CS 18/165-1 Li. Similar Einhell model names do not establish blade fit.

Manufacturer source ↗Checked 2026-11-20Exact model: TE-CS 18/165-1 Li - Solo
Ad · affiliate linkSearch Amazon UKCompare the selected product with your model’s specifications.

Same diameter and bore: comparison references

These blade records share your model’s published diameter and bore, but their manufacturer mappings do not list this model. Compare kerf, body thickness, construction, rated speed and material in the manual before considering any substitution.

Check before buying

  1. Confirm TE-CS 18/165-1 Li and article 4331207; keep the /165-1 model suffix.
  2. Verify blade kerf, body thickness and approved cutting materials against the tool manual and blade specification.
  3. Choose a blade rated for at least the tool's specified 4,200 rpm maximum idle speed.
  4. Check the mounting bore and cutting direction; do not infer compatibility with a different bore from a reducer being offered.

Print the saw blade diameter, bore and kerf chart →

Check documented dust extraction connections →

Source & scope

Einhell UK TE-CS 18/165-1 Li - Solo technical details, article 4331207

Manufacturer source checked 2026-11-20.

Report a specification correction
Looking for a different model?Browse all model references →

More circular saws

Browse category